Complete teardown and ESPHome flashing guide for the Tuya S06 Pro WiFi IR blaster with WB3S (BK7231T). Includes PCB pinout, UART wiring, LTChipTool flashing steps, ESPHome YAML configuration, IR transmitter/receiver setup, and built-in temperature and humidity sensor support for Home Assistant.
A custom 3D printed dust port that improves dust collection performance for edge trimming tasks. It’s designed specifically for the Makita DRT50/XTR01 Compact Router, but may also fit other bases with a side guide holder. The port mounts easily using the existing guide holder and includes both 36 mm and 30 mm hose versions, plus a dust cap for non-vacuum use.
A simple 3D printed low-profile dust hose adapter design for a cyclone dust separator. These compact adapters convert the 2-inch port to 36 mm and 30 mm sizes, letting you connect standard vacuum hoses directly without bulky PVC parts. Cleaner, smaller, and easier to use.
I designed a 3D-printed dog hole drilling template to make adding dog holes to my DIY cutting platform fast, accurate, and hassle-free. Perfect for mounting fences, accessories, and clamps for repeat cuts.
Easily turning a smart switch modules into movable smart dimmers compatible with Home Assistant. No wiring hassle—just plug, play, and relocate your smart lighting setup.
3D print an enclosure for ESP32 Relay X4 module with LED status, control buttons, and optional I2C sensors, fully controllable via ESPHome and Home Assistant.
3D-printed enclosure designed for the KEWEISI KWS-AC300 AC power meter, making it easy to monitoring the power consumption of your home appliances.
How to upgrade the SOVOL Filament Dryer with ESP32 and integrated it to Home Assistant using ESPHome for wireless control and monitoring.
In this guide, I’ll walks you through hacking the capacitive touch spring buttons in simple appliances with ESP module with ESPHome firmware. So you can control them wirelessly with Home Assistant.
An affordable and effective solution for organize the Articulated Arm and Small Ball Head with 3D-printed custom hanger and IKEA SKADIS pegboards.
3D-printed custom magnetic nozzle for the Mini Turbo Jet Fan X3, designed for precise airflow. This new nozzle enhances your ability to focus airflow on specific spots, providing improved air pressure and efficiency for targeted cleaning tasks.
Upgrade your RELIFE RL-601L PCB fixture with custom 3D-printed parts for improved versatility and stability in various soldering tasks. This easy upgrade increases the clamp height, enabling you to securely hold PCBs with taller components, ultimately enhancing precision and adaptability for your electronics projects.
In this post, I’ll guide you through creating a simple, resistor-based capacitor discharge tool that allows you to safely and conveniently discharge capacitors.
Discover how to stream music from Home Assistant to any traditional Bluetooth speaker and automate wireless audio streaming. This guide will use ESP32 module with Squeezelite-ESP32 firmware and a custom 3D-printed enclosure for easy integrate to smart home setup.
Building a custom modular power supply enclosure for your Fosi Audio BT20A Pro bluetooth amplifier using a 160×80 aluminium extrusion case and 3D-printed components. This enclosure can significantly enhance both functionality and aesthetics.
How to make a simple DIY AQI module with display using ESP32, CCS811 sensor, AHT21 sensor and a custom 3D print enclosure.
Wireless Flash Tuya base LDNIO Power Strip with ESPHome firmware using Tuya Cloudcutter, enabling local control with Home Assistant.
How to install Tuya Cloudcutter on a Raspberry Pi Zero 2W to wirelessly flash Tuya IoT devices with ESPHome firmware, enabling local use with Home Assistant.
3D Printing / Electronics / Gadgets / Tools
DIY Ultimate 120mm Soldering Fume Extractor [3D Print]
March 15, 2023
DIY Soldering Station Using Makita 18V Battery (T12 Compatible)
December 6, 2022
Easily Integrate SOVOL Filament Dryer to Home Assistant with ESP32
November 26, 2024
